Zum Hauptinhalt wechseln

Einleitung

This guide will give step by step instructions showing how to repair the microphone on the Samsung Gear S.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Remove the wrist strap by peeling back the rubber starting from one corner of the watch face. Continue peeling the rubber away from the watch face until the strap is completely off. Remove the wrist strap by peeling back the rubber starting from one corner of the watch face. Continue peeling the rubber away from the watch face until the strap is completely off. Remove the wrist strap by peeling back the rubber starting from one corner of the watch face. Continue peeling the rubber away from the watch face until the strap is completely off.
    • Remove the wrist strap by peeling back the rubber starting from one corner of the watch face. Continue peeling the rubber away from the watch face until the strap is completely off.

  2. Starting from an edge, wedge a metal spudger in between the screen and the chrome trim ring and pry, lifting the screen outwards. Some force is needed due to adhesive seal.
    • Starting from an edge, wedge a metal spudger in between the screen and the chrome trim ring and pry, lifting the screen outwards.

    • Some force is needed due to adhesive seal.

  3. Use a plastic opening tool to  gently pry upwards on the plastic motherboard assembly.
    • Use a plastic opening tool to gently pry upwards on the plastic motherboard assembly.

  4. Locate the ribbon assembly attaching the display to the motherboard.
    • Locate the ribbon assembly attaching the display to the motherboard.

  5. Use a plastic opening tool to detach the glass screen/ LED Display ribbon connector from the motherboard.
    • Use a plastic opening tool to detach the glass screen/ LED Display ribbon connector from the motherboard.

  6. Now the watch should be in three separate pieces.
    • Now the watch should be in three separate pieces.

  7. Locate the microphone on the lower right corner of the plastic motherboard assembly .
    • Locate the microphone on the lower right corner of the plastic motherboard assembly .

  8. Use the plastic opening tool to lift up the microphone ribbon connector.
    • Use the plastic opening tool to lift up the microphone ribbon connector.

  9. Use the spudger to lift up the white microphone circuit board.
    • Use the spudger to lift up the white microphone circuit board.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

Luis Franco

Mitglied seit: 03.09.2015

1.076 Reputation

4 Anleitungen geschrieben

Team

USF Tampa, Team 12-1, Blackwell Fall 2015 Mitglied von USF Tampa, Team 12-1, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G1

4 Mitglieder

5 Anleitungen geschrieben

3 Kommentare

ok. thanks a lot but one stupid question where can i buy a new microphone?

amir arya - Antwort

any chance of posting were to buy a new mic please..

ian stapleton - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 1

Insgesamt: 2,052