Einleitung
Is your bezel ring scuffed up, unresponsive, or not as satisfyingly clicky as it was new? This guide shows you how to remove and replace the front bezel ring.
Was du brauchst
-
-
Hold the watch firmly in one hand, face up.
-
Place the iFixit Opening Tool under the bezel ring and use prying motion to remove.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
26 weitere Personen haben diese Anleitung absolviert.
Team
Cal Poly, Team S15-G2, White Fall 2018 Mitglied von Cal Poly, Team S15-G2, White Fall 2018
CPSU-WHITE-F18S15G2
4 Mitglieder
34 Anleitungen geschrieben
45 Kommentare zur Anleitung
I’ve tried lining it up with the screen and pushing it in about 50 times now and everytime I do it clicks, but after rotating it a few times the bezel locks and I can’t rotate it anymore. YES all the ball bearings are in the right place, YES the springs are in the right place. There’s this little plastic piece that I can’t tell if it goes inside the bezel piece or if it goes on top of the watch next to the ball bearings. I’m able to get the bezel back on when I put the little plastic piece on the bezel, it clicks right in, but it locks up. When I leave the little plastic piece on the watch I can’t get it to click in at all. I think I just royally f’ed up my watch!
put the plastic ring in the bezel first. make sure the the legs on the plastic ring are facing the watch an not the bezel. i lost 2 springs though. be careful when cleaning and tilting.
did u manage to fix it?
