Zum Hauptinhalt wechseln

Ersatzteile

Keine Ersatzteile angegeben.

  1. Samsung Glyde Motherboard Replacement, Battery: Schritt 1, Bild 1 von 1
    • Using your thumb, press down and slide the back cover away from the camera.

  2. Samsung Glyde Motherboard Replacement: Schritt 2, Bild 1 von 1
    • Remove the battery from the phone by using your plastic opening tool to find a gap at any edge of the battery and lifting the battery up.

  3. Samsung Glyde Motherboard Replacement, Motherboard: Schritt 3, Bild 1 von 2 Samsung Glyde Motherboard Replacement, Motherboard: Schritt 3, Bild 2 von 2
    • Using a Phillips#00 screw driver, remove the six 4mm screws holding the back case together.

  4. Samsung Glyde Motherboard Replacement: Schritt 4, Bild 1 von 2 Samsung Glyde Motherboard Replacement: Schritt 4, Bild 2 von 2
    • Use a plastic opening tool to pry the case off. To do this, find a gap on any side of the phone, top preferably, and slip the tip of the tool in the gap

    • Now use moderate strength and slowly maneuver the tool around the outside until the case becomes loose.

    • Using your fingers, take the case off.

  5. Samsung Glyde Motherboard Replacement: Schritt 5, Bild 1 von 2 Samsung Glyde Motherboard Replacement: Schritt 5, Bild 2 von 2
    • The green film above the camera is the camera connector to the motherboard.

    • Use a plastic opening tool to disconnect the camera connector.

  6. Samsung Glyde Motherboard Replacement: Schritt 6, Bild 1 von 2 Samsung Glyde Motherboard Replacement: Schritt 6, Bild 2 von 2
    • The golden film connector connects the keyboard to the motherboard.

    • Use a plastic opening tool to disconnect the keyboard connector.

  7. Samsung Glyde Motherboard Replacement: Schritt 7, Bild 1 von 2 Samsung Glyde Motherboard Replacement: Schritt 7, Bild 2 von 2
    • The circular connector holds the motherboard in place.

    • Using a plastic opening tool, disconnect the circular connector.

  8. Samsung Glyde Motherboard Replacement: Schritt 8, Bild 1 von 3 Samsung Glyde Motherboard Replacement: Schritt 8, Bild 2 von 3 Samsung Glyde Motherboard Replacement: Schritt 8, Bild 3 von 3
    • There is a LCD connector underneath the motherboard.

    • Gently lift the far edge of the motherboard upwards toward the center of the phone.

    • Using a plastic opening tool, disconnect the LCD connector.

  9. Samsung Glyde Motherboard Replacement: Schritt 9, Bild 1 von 2 Samsung Glyde Motherboard Replacement: Schritt 9, Bild 2 von 2
    • After disconnecting the four connectors, gently lift the motherboard up with your fingers.

    • Place the motherboard in a secure area.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Stephen

Mitglied seit: 12.10.2011

26 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 3-12, Regan Fall 2011 Mitglied von Cal Poly, Team 3-12, Regan Fall 2011

CPSU-REGAN-F11S3G12

4 Mitglieder

14 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 2

Insgesamt: 1,082