Einleitung
Before replacing, make sure the microphone is not being covered by your hand during filming, as this will muffle the audio.
Was du brauchst
-
-
Remove the 4 mm screw on the underside of the camcorder near the tripod mount.
-
-
-
Remove the 4 mm screw next to the buckle of the hand strap closest to the lens.
-
-
-
-
Open the LCD screen. Remove the 4 mm screw on the inside panel, located at top left corner.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.