Einleitung
Shows how to replace motherboard with pictures and words. Removal of motherboard requires opening the camera and unscrewing screws from motherboard to remove from rear case.
Was du brauchst
-
-
To remove the wristband of the device, grab the middle loop and pull the band through.
-
-
-
Open the HDMI door on the side of the camera.
-
Remove the single screw using a Phillips #00 screwdriver.
-
-
-
Use the iFixit opening tool on both sides on the device. Pry apart both sections with light force.
-
-
-
-
Pull the wire ribbon out with a pair of tweezers.
-
-
-
-
Use tweezers to grab the wire ribbon, then pull the wire out of connection.
-
-
-
There are 5 Phillips size 00 screws. Remove all 5 screws.
-
Wire ribbon is attached to the motherboard.
-
-
-
Use tweezers to disconnect the wire as shown. This will loosen the motherboard from the rear case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Eine weitere Person hat diese Anleitung absolviert.
Team
USF Tampa, Team 9-2, Blackwell Winter 2015 Mitglied von USF Tampa, Team 9-2, Blackwell Winter 2015
USFT-BLACKWELL-W15S9G2
4 Mitglieder
16 Anleitungen geschrieben
