Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Samsung Juke Camera/Speaker Replacement

Was du brauchst

  1. Samsung Juke Camera/Speaker Replacement, Battery: Schritt 1, Bild 1 von 1
    • Press and hold down the button on the bottom side of the phone with your finger.

  2. Samsung Juke Camera/Speaker Replacement: Schritt 2, Bild 1 von 2 Samsung Juke Camera/Speaker Replacement: Schritt 2, Bild 2 von 2
    • While holding the button down, remove the back cover of the phone.

  3. Samsung Juke Camera/Speaker Replacement, Camera/Speaker: Schritt 3, Bild 1 von 1
    • Use the size 00 Phillips screwdriver to remove the four screws located on the back of the phone. These screws are circled in yellow in the given image.

  4. Samsung Juke Camera/Speaker Replacement: Schritt 4, Bild 1 von 1
    • Using the same 00 Phillips screwdriver, remove the two screws at the bottom back plate of the phone near the camera and the speaker.

    • These screws will be 7.25 mm long.

  5. Samsung Juke Camera/Speaker Replacement: Schritt 5, Bild 1 von 3 Samsung Juke Camera/Speaker Replacement: Schritt 5, Bild 2 von 3 Samsung Juke Camera/Speaker Replacement: Schritt 5, Bild 3 von 3
    • Before proceeding, locate the USB port (where the charger can be plugged in) and open it using the iFixit Opening Tool.

    • Failure to open USB port cover at this stage may result in damaging the device.

  6. Samsung Juke Camera/Speaker Replacement: Schritt 6, Bild 1 von 1
    • Remove the screws on either side of the camera/speaker with a Phillips 00 screwdriver.

    • These screws will be 5.45 mm long.

  7. Samsung Juke Camera/Speaker Replacement: Schritt 7, Bild 1 von 2 Samsung Juke Camera/Speaker Replacement: Schritt 7, Bild 2 von 2
    • Use the iFixit Opening Tool to begin removing the camera/speaker from the logic board.

    • Practice caution to prevent damage to the attaching ribbon.

  8. Samsung Juke Camera/Speaker Replacement: Schritt 8, Bild 1 von 2 Samsung Juke Camera/Speaker Replacement: Schritt 8, Bild 2 von 2
    • To completely remove the camera/speaker, locate the orange attachment beneath it (as shown in the image).

    • Then, use the iFixit Opening Tool to gently pry the camera/speaker off.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Team

Cal Poly, Team 6-18, Maness Spring 2010 Mitglied von Cal Poly, Team 6-18, Maness Spring 2010

CPSU-MANESS-S10S6G18

3 Mitglieder

12 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 5

Insgesamt: 3,493