Einleitung
This guide will explain how to successfully remove the screen underneath the outside shell and on top of the circuit board.
Was du brauchst
-
-
Remove 4 screws from bottom of camera
-
Remove 2 screws from side of camera
-
Remove 2 screws from side of camera
-
-
-
Squeeze area noted by blue square and pull outside shell apart from remaining camera.
-
-
-
-
Lift screen up such that orange circuit ribbon fully extends
-
Flip white peg up noted by blue box
-
Using tweezers gently remove orange circuit ribbon from white peg. Make sure white peg remains up otherwise ribbon may tear.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
Team
University of Illinois Urbana-Champaign, Team 1-4, Scrogum Spring 2014 Mitglied von University of Illinois Urbana-Champaign, Team 1-4, Scrogum Spring 2014
UICU-SCROGUM-S14S1G4
4 Mitglieder
10 Anleitungen geschrieben
