Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
The keypad may become broken over time, this guide will assist in the replacement of the keypad.
Was du brauchst
-
-
After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.
-
-
-
Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.
-
-
-
-
Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open.
-
Then disconnect the small power connector near the top of the phone.
-
-
-
When using a spudger the keypad housing comes off quite easily, although it may be necessary to guide the ribbon cable through the slot in the housing.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.