Zum Hauptinhalt wechseln

Samsung SPH-A500 Speaker Replacement

Was du brauchst

  1. Samsung SPH-A500 Speaker Replacement, Speaker: Schritt 1, Bild 1 von 1
    • Flip open the phone, remove the two rubber covers under the LCD screen.

    • Remove the two screws using a small Philips screwdriver.

  2. Samsung SPH-A500 Speaker Replacement: Schritt 2, Bild 1 von 1
    • Using an Ipod opening tool or your finger nails, pry open the back cover of the LCD screen.

    • Note: Some force may be required.

  3. Samsung SPH-A500 Speaker Replacement: Schritt 3, Bild 1 von 1
    • Completely separate the back cover from the rest of the phone.

    • Close the phone.

  4. Samsung SPH-A500 Speaker Replacement: Schritt 4, Bild 1 von 1
    • The speaker is covered with silver tape on the bottom of the logic board.

  5. Samsung SPH-A500 Speaker Replacement: Schritt 5, Bild 1 von 1
    • Remove the silver tape that is covering the speaker.

  6. Samsung SPH-A500 Speaker Replacement: Schritt 6, Bild 1 von 1
    • Remove the speaker.

    • Note: In order to completely remove the speaker you must disconnect the wires, which will require a soldering iron to reattach the new speaker.

  7. Samsung SPH-A500 Speaker Replacement: Schritt 7, Bild 1 von 1
    • Attach the new speaker using a soldering iron.

    • Put the speaker back to it's original position and place the silver tape over it.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Eine weitere Person hat diese Anleitung absolviert.

Team

Cal Poly, Team 18-100, Johann Spring 2010 Mitglied von Cal Poly, Team 18-100, Johann Spring 2010

CPSU-JOHANN-S10S18G100

4 Mitglieder

10 Anleitungen geschrieben

0 Kommentare zur Anleitung

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 9

Letzte 30 Tage: 14

Insgesamt: 2,381