Was du brauchst
-
-
Remove these screws from the camera using a phillips head screwdriver.
-
-
-
Wedge a spudger/flathead screwdriver inside of the shell where the screws were to pry the shell off of the back.
-
-
-
-
Remove the Phillips head screw from the rear panel control board to reveal the LCD's connection to the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.