Einleitung

This guide will show how to remove the covers from the underside of the laptop, remove the battery, and replace it with the new battery.

Before beginning, make sure the laptop is completely powered off and it is not being charged via the power cord. Remove the single screw holding the hard drive cover in place. This screw is 6.7 mm long. Take off the cover using the built-in lips for leverage.
  • Before beginning, make sure the laptop is completely powered off and it is not being charged via the power cord.

  • Remove the single screw holding the hard drive cover in place. This screw is 6.7 mm long.

  • Take off the cover using the built-in lips for leverage.

Kommentar hinzufügen

Remove the rest of the screws holding the entire back cover in place. There are 13 of these screws. These are 4.0 mm long. Remove the screws holding the cover on from under the hard drive cover. These are 6.7 mm long.
  • Remove the rest of the screws holding the entire back cover in place. There are 13 of these screws. These are 4.0 mm long.

  • Remove the screws holding the cover on from under the hard drive cover. These are 6.7 mm long.

Kommentar hinzufügen

Remove the rubber pads near where the hard drive cover was using a sharp pair of tweezers. Unscrew the 4 mm screws underneath these pads. Unscrew the 4 mm screws underneath these pads.
  • Remove the rubber pads near where the hard drive cover was using a sharp pair of tweezers.

  • Unscrew the 4 mm screws underneath these pads.

Kommentar hinzufügen

Remove the entire rest of the back cover. There are snaps that hold the cover near the fan in place. Be careful not to break these.
  • Remove the entire rest of the back cover.

  • There are snaps that hold the cover near the fan in place. Be careful not to break these.

Kommentar hinzufügen

Remove the tape holding the wires in place. Unscrew the four 4.5 mm screws holding the battery in place. Unscrew the two 6.7 mm screws at the top of the battery.
  • Remove the tape holding the wires in place.

  • Unscrew the four 4.5 mm screws holding the battery in place.

  • Unscrew the two 6.7 mm screws at the top of the battery.

Kommentar hinzufügen

Unplug the battery from the motherboard. Remove the battery from its position on the underside of the laptop.
  • Unplug the battery from the motherboard.

  • Remove the battery from its position on the underside of the laptop.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

6 weitere Nutzer haben diese Anleitung absolviert.

Timothy

Mitglied seit 30.01.2015

1.182 Reputation

5 Anleitungen geschrieben

Team

USF Tampa, Team 16-3, Watkins Winter 2015 Mitglied von USF Tampa, Team 16-3, Watkins Winter 2015

USFT-WATKINS-W15S16G3

4 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 6

Letzte 7 Tage: 67

Letzte 30 Tage: 339

Insgesamt: 13,476