Einleitung
Random Access Memory, or RAM (pronounced as ramm), is the physical hardware inside a computer that temporarily stores data, serving as the computer's "working" memory. It it held in by 2 clips on the sides of the unit, and will pop upward when released.
Was du brauchst
-
-
Locate the rubber feet at every corner of the laptop back panel. Use the ifixit prying tool, and break the adhesive between the rubber feet, and the case.
-
-
-
Use a Phillips #0 screwdriver to remove the ten 0.2mm screws from the bottom cover.
-
-
-
Find an opening on the back of the laptop. Use the plastic prying tool to help pry open the back panel of the laptop.
-
-
-
-
Place your fingernail or a pry tool in between the metal retention bars and the RAM unit.
-
-
-
Pull up on the RAM unit at a 45 degree angle to release it from the retention bars.
-
To insert the replacement RAM unit, follow these instructions in reverse. If RAM unit replacement does not solve your issue, you may have a defective motherboard.
To insert the replacement RAM unit, follow these instructions in reverse. If RAM unit replacement does not solve your issue, you may have a defective motherboard.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
4 weitere Nutzer:innen haben diese Anleitung absolviert.