Einleitung
Replacing A Drain Pump
Was du brauchst
-
-
Drain any excess water preferably outside, using the cap on the side of the washing washine
-
-
-
Once drained, put the cap aside. Now flip the washing machine onto it's front side
-
-
-
-
Remove the 3 screws at the bottom of the washing machine where the drain hose was.
-
-
-
Inside the washing machine there two hose connected to the drain pump assembly, remove them.
-
-
-
Disconnect the two wires that give the drain pump power and unscrew the protective cover after this
-
-
-
Once you have the unit free, there are 3 screws connecting the pump to the other part of the drain pump assembly . unscrew the three screws
-
-
-
Now your pump is free. Replace the pump and put everything back together.
-
You have successfully replaced your drain pump
-
https://www.samsung.com/ae/support/model... follow the link above for guides and FAQ
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.