Ersatzteile

Kein Ersatzteil erforderlich.

Slide the back cover forward toward the top of the device with your thumb.
  • Slide the back cover forward toward the top of the device with your thumb.

Kommentar hinzufügen

The back cover is now separated from the device.
  • The back cover is now separated from the device.

Kommentar hinzufügen

Apply a fingernail or a plastic opening tool to the base of the battery.
  • Apply a fingernail or a plastic opening tool to the base of the battery.

Kommentar hinzufügen

Lift up gently.  The battery should come up and out.
  • Lift up gently. The battery should come up and out.

Kommentar hinzufügen

The battery is now removed from the device.
  • The battery is now removed from the device.

Kommentar hinzufügen

Remove the two black .265" screws at the base of the device.
  • Remove the two black .265" screws at the base of the device.

Kommentar hinzufügen

Using a plastic opening tool, pry up the two arms of the case cover near the middle of the device to free them from the sides.
  • Using a plastic opening tool, pry up the two arms of the case cover near the middle of the device to free them from the sides.

Kommentar hinzufügen

Slide the rear case cover toward the top of the device with your thumb to release it.
  • Slide the rear case cover toward the top of the device with your thumb to release it.

Kommentar hinzufügen

The rear case cover can now be separated from the device.
  • The rear case cover can now be separated from the device.

Kommentar hinzufügen

Remove the single 0.327" silver screw on the back of the device that was exposed when you removed the rear case cover.
  • Remove the single 0.327" silver screw on the back of the device that was exposed when you removed the rear case cover.

Kommentar hinzufügen

Flip the device over and work a plastic opening tool around the base of the front case cover until it loosens.
  • Flip the device over and work a plastic opening tool around the base of the front case cover until it loosens.

  • CAUTION: Do not fully remove the case cover until the next step has been completed or you may damage the ribbon cable. To be safe, only lift the cover high enough to fit a spudger in the gap.

Kommentar hinzufügen

Open the case cover starting on the side most distance from the buttons.
  • Open the case cover starting on the side most distance from the buttons.

Kommentar hinzufügen

Using a plastic opening tool, gently pry up on the top of where the ribbon cable attaches to the motherboard to release the cable.
  • Using a plastic opening tool, gently pry up on the top of where the ribbon cable attaches to the motherboard to release the cable.

Kommentar hinzufügen

You can now safely remove the front case cover from the device.
  • You can now safely remove the front case cover from the device.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Nicolas Coffey

Mitglied seit 27.01.2012

43 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 3-30, Amido Winter 2012 Mitglied von Cal Poly, Team 3-30, Amido Winter 2012

CPSU-AMIDO-W12S3G30

3 Mitglieder

6 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 6

Insgesamt: 1,072