Be sure to unplug the vacuum before disassembling it to prevent electric shock.
  • Be sure to unplug the vacuum before disassembling it to prevent electric shock.

  • Lay vacuum on side.

  • Using a Phillips screwdriver, unscrew the screw behind the front wheels, on the edge of the underside of the vacuum cleaner.

Kommentar hinzufügen

Stand the vacuum upright and identify the dial on the front of the vacuum. Unscrew the screw using a Torx 20 screwdriver
  • Stand the vacuum upright and identify the dial on the front of the vacuum.

  • Unscrew the screw using a Torx 20 screwdriver

  • Pull the dial out.

Kommentar hinzufügen

Lift the cover off of the vacuum.
  • Lift the cover off of the vacuum.

Kommentar hinzufügen

Identify the two gray metal plates at the front of the vacuum.
  • Identify the two gray metal plates at the front of the vacuum.

  • Using the T20 Torx screwdriver, remove the four screws on the smaller gray plate holding the larger gray metal plates.

Kommentar hinzufügen

Remove the small metal plate with the black bolt in the center.
  • Remove the small metal plate with the black bolt in the center.

  • Repeat on opposite side near the other wheel

Kommentar hinzufügen

Remove the larger gray metal plate.
  • Remove the larger gray metal plate.

  • Repeat on opposite side near other wheel.

Kommentar hinzufügen

Remove the front wheels by lifting the silver bar that attaches the two wheels. Detach the spring attaching the wheels to the vacuum.
  • Remove the front wheels by lifting the silver bar that attaches the two wheels.

  • Detach the spring attaching the wheels to the vacuum.

Kommentar hinzufügen

Remove a wheel from the wheel's axel by pulling off the wheel. Slide spring off.
  • Remove a wheel from the wheel's axel by pulling off the wheel.

  • Slide spring off.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Caycie Pascual

Mitglied seit 26.09.2012

1 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 16-58, Forte Fall 2012 Mitglied von Cal Poly, Team 16-58, Forte Fall 2012

CPSU-FORTE-F12S16G58

5 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 5

Insgesamt: 675