Ersatzteile

Kein Ersatzteil erforderlich.

Before disassembling the device, make sure it is powered off.
  • Before disassembling the device, make sure it is powered off.

  • Remove the four 1.5mm screws on the back of the device.

Kommentar hinzufügen

Using a plastic opening tool, lift the metal backing from the front of the device.
  • Using a plastic opening tool, lift the metal backing from the front of the device.

Kommentar hinzufügen

Pull the rear panel off of the Sansa e260R.
  • Pull the rear panel off of the Sansa e260R.

Kommentar hinzufügen

Grip the bottom of the battery with your thumb and forefinger and pull it away from the device.
  • Grip the bottom of the battery with your thumb and forefinger and pull it away from the device.

Kommentar hinzufügen

Remove the four 1.5mm screws on the inner casing of the device.
  • Remove the four 1.5mm screws on the inner casing of the device.

  • These screws are very small and hard to extract from the casing. It may be helpful to use a magnetic screwdriver.

Kommentar hinzufügen

Flip the device so that the front is facing you.
  • Flip the device so that the front is facing you.

  • Slide a plastic opening tool between the plastic front cover and the metal back cover of the device.

Kommentar hinzufügen

Pull the front cover away from the rest of the device. Pull the front cover away from the rest of the device.
  • Pull the front cover away from the rest of the device.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Casey Smith

Mitglied seit 20.01.2012

84 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 8-15, Maness Winter 2012 Mitglied von Cal Poly, Team 8-15, Maness Winter 2012

CPSU-MANESS-W12S8G15

5 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 1,711