Einleitung

This guide will illustrate for you how to replace the battery from a Sanyo Katana Eclipse X.

Ersatzteile

Kein Ersatzteil erforderlich.

Press the battery release button located on the back of the phone.
  • Press the battery release button located on the back of the phone.

  • With the button depressed, pull down on the battery protector to remove it from the phone.

    • The phone's battery will now be exposed.

Kommentar hinzufügen

Slide a thin object under the white tab located on the bottom of the battery and carefully lift away from the phone.
  • Slide a thin object under the white tab located on the bottom of the battery and carefully lift away from the phone.

    • A small, flat-tip screwdriver or credit card may be helpful for this step.

  • The battery should now be free of the phone.

Kommentar hinzufügen

  • Align the copper receptors on the back of your battery so the phone's copper receptors are touching the battery terminals.

    • Refer to photo illustrations.

  • Using your thumb, apply gentle pressure to the battery until it clicks into place.

Kommentar hinzufügen

  • Take the phone’s back casing and set it over the battery.

  • Apply gentle pressure, pushing towards the top of the phone until your hear a click.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Thomas Scaggs

Mitglied seit 15.10.2012

209 Reputation

2 Anleitungen geschrieben

Team

University of Maine, Team 1-3, Diaz Fall 2012 Mitglied von University of Maine, Team 1-3, Diaz Fall 2012

UMAINE-DIAZ-F12S1G3

5 Mitglieder

6 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 248