Zum Hauptinhalt wechseln

Sanyo Katana Eclipse X Battery Replacement

Was du brauchst

  1. Sanyo Katana Eclipse X Battery Replacement, Back Panel: Schritt 1, Bild 1 von 2 Sanyo Katana Eclipse X Battery Replacement, Back Panel: Schritt 1, Bild 2 von 2
    • Press the battery release button located on the back of the phone.

    • With the button depressed, pull down on the battery protector to remove it from the phone.

    • The phone's battery will now be exposed.

  2. Sanyo Katana Eclipse X Battery Replacement: Schritt 2, Bild 1 von 1
    • Slide a thin object under the white tab located on the bottom of the battery and carefully lift away from the phone.

    • A small, flat-tip screwdriver or credit card may be helpful for this step.

    • The battery should now be free of the phone.

  3. Sanyo Katana Eclipse X Battery Replacement, Battery: Schritt 3, Bild 1 von 1
    • Align the copper receptors on the back of your battery so the phone's copper receptors are touching the battery terminals.

    • Refer to photo illustrations.

    • Using your thumb, apply gentle pressure to the battery until it clicks into place.

  4. Sanyo Katana Eclipse X Battery Replacement: Schritt 4, Bild 1 von 1
    • Take the phone’s back casing and set it over the battery.

    • Apply gentle pressure, pushing towards the top of the phone until your hear a click.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Thomas Scaggs

Mitglied seit: 10/15/12

209 Reputation

2 Anleitungen geschrieben

Team

University of Maine, Team 1-3, Diaz Fall 2012 Mitglied von University of Maine, Team 1-3, Diaz Fall 2012

UMAINE-DIAZ-F12S1G3

5 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 6

Insgesamt: 471