Zum Hauptinhalt wechseln

Sega Genesis Reset Button Repair

Was du brauchst

  1. Sega Genesis Reset Button Repair, Outer Case: Schritt 1, Bild 1 von 1
    • Remove the six screws from the underside of the console with a Phillips #1 screwdriver.

  2. Sega Genesis Reset Button Repair: Schritt 2, Bild 1 von 1
    • Flip the Sega Genesis upright.

  3. Sega Genesis Reset Button Repair: Schritt 3, Bild 1 von 1
    • Gently lift the top casing.

    • Note: the case will be connected to the main board by LED wires.

  4. Sega Genesis Reset Button Repair: Schritt 4, Bild 1 von 1
    • Bend out the LED leads into vertical positions.

  5. Sega Genesis Reset Button Repair: Schritt 5, Bild 1 von 1
    • Slide the LED wire apparatus off the lead pins.

    • Note: observe which color wire corresponds with which length of pin.

  6. Sega Genesis Reset Button Repair: Schritt 6, Bild 1 von 1
    • Separate the main board from the outer case.

  7. Sega Genesis Reset Button Repair, Sega Genesis Reset Button Repair: Schritt 7, Bild 1 von 1
    • Using Philips screwdriver, remove 11 screws securing silver casing.

  8. Sega Genesis Reset Button Repair: Schritt 8, Bild 1 von 1
    • Remove silver case.

  9. Sega Genesis Reset Button Repair: Schritt 9, Bild 1 von 1
    • Locate reset button on motherboard

  10. Sega Genesis Reset Button Repair: Schritt 10, Bild 1 von 1
    • Place three pieces of 1cm x 1cm masking tape over reset button.

Abschluss

To reassemble your device, follow these instructions in reverse order. And the most important, be happy!

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

calvin

Mitglied seit: 10/05/10

234 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 3-29, Regan Fall 2010 Mitglied von Cal Poly, Team 3-29, Regan Fall 2010

CPSU-REGAN-F10S3G29

4 Mitglieder

14 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 18

Letzte 30 Tage: 63

Insgesamt: 16,701