Einleitung
If you need to replace or re-install the accessory hose attachment for your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed to complete this replacement.
-
-
Turn off the Steam Pocket Mop and unplug it from the wall.
-
-
-
-
Disconnect the hand-held steamer unit from the accessory extension hose.
-
Grip the hand-held steamer and push down on the two release buttons.
-
Gently pull the accessory extension hose out in a horizontal motion until it disconnects.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
UW Tacoma, Team S1-G3, Rose Fall 2018 Mitglied von UW Tacoma, Team S1-G3, Rose Fall 2018
UWT-ROSE-F18S1G3
4 Mitglieder
10 Anleitungen geschrieben
2 Kommentare
What if it won't allow to power on once reassembled? The light flashes but won't click on.
really?? take it on and off with more words.... how about something helpful like where this stupid little rubber band goes so that the trigger is actuated when the unit is placed in the floor mopper. pat yourself on the back you rewrote the basic user instructions and called it a repair. thanks for the complete waste of my time
