Zum Hauptinhalt wechseln

Einleitung

Replace the battery when the vacuum does not turn on even after charging.

Werkzeuge

Keine Werkzeuge angegeben.

  1. Turn the device over to reveal the bottom of the motorized brush head.
    • Turn the device over to reveal the bottom of the motorized brush head.

  2. Slide the latch next to the panel upwards into the unlocked position. Slide the latch next to the panel upwards into the unlocked position.
    • Slide the latch next to the panel upwards into the unlocked position.

  3. Slide the panel to the right to reveal the battery.
    • Slide the panel to the right to reveal the battery.

  4. Pull the battery from the vacuum. Pull the battery from the vacuum.
    • Pull the battery from the vacuum.

  5. Disconnect the battery from the vacuum by pinching the white latch and pulling the two pieces apart. Disconnect the battery from the vacuum by pinching the white latch and pulling the two pieces apart.
    • Disconnect the battery from the vacuum by pinching the white latch and pulling the two pieces apart.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Zachary Liu

Mitglied seit: 24.01.2018

523 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team S1-G5, Livingston Winter 2018 Mitglied von Cal Poly, Team S1-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G5

3 Mitglieder

5 Anleitungen geschrieben

How much is the part for the shark

sumi49 - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 8

Letzte 7 Tage: 45

Letzte 30 Tage: 168

Insgesamt: 3,605