Repariere deine Sachen Community Store

Shark Professional Steam Pocket Mop Head Replacement

Einleitung

If you need to replace or re-install the mop head of your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed.

  1. Shark Professional Steam Pocket Mop Head Replacement, Mop Head: Schritt 1, Bild 1 von 2 Shark Professional Steam Pocket Mop Head Replacement, Mop Head: Schritt 1, Bild 2 von 2

    • Turn off the Steam Pocket Mop and unplug it from the wall.

    • Be sure that any water in the water tank cools before proceeding.

    Bearbeiten

  3. Shark Professional Steam Pocket Mop Head Replacement: Schritt 2, Bild 1 von 3 Shark Professional Steam Pocket Mop Head Replacement: Schritt 2, Bild 2 von 3 Shark Professional Steam Pocket Mop Head Replacement: Schritt 2, Bild 3 von 3

    • Push down on the round, grey release button near the connection point, while pulling the mop head out.

    • The mop head should slide out and detach.

    • When reassembling, you should hear it click into place if it is properly installed.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

Autor:in

mit 3 anderen Mitwirkenden

Tyler Wicke

Mitglied seit: 10/17/18

237 Reputation

2 Anleitungen geschrieben

Auszeichnungen: 6

+ 3 weitere Auszeichnungen

Team

UW Tacoma, Team S1-G3, Rose Fall 2018 Mitglied von UW Tacoma, Team S1-G3, Rose Fall 2018

UWT-ROSE-F18S1G3

4 Mitglieder

10 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 3

Letzte 7 Tage: 10

Letzte 30 Tage: 24

Insgesamt: 1,900