Einleitung
When a dirty filter causes the vacuum suction to greatly decrease, you might want to think about replacing it.
-
-
Lift up the red unlatch button located on the back end of the dust cup.
-
-
-
-
While pulling the red latch button, pull the dust cup away from the vacuum to remove it.
-
-
-
Lift the filter upwards.
-
To clean the filter, rinse the filter with water and allow it to dry before placing it back into the vacuum.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team S19-G3, White Winter 2019 Mitglied von Cal Poly, Team S19-G3, White Winter 2019
CPSU-WHITE-W19S19G3
5 Mitglieder
12 Anleitungen geschrieben
