Ersatzteile

Kein Ersatzteil erforderlich.

Place the TV face down on a flat smooth surface as to not scratch the screen.
  • Place the TV face down on a flat smooth surface as to not scratch the screen.

  • Remove the four 8mm screws attaching the stand to the TV.

Kommentar hinzufügen

Lift the stand off the television.
  • Lift the stand off the television.

Kommentar hinzufügen

  • Remove the two back panels to display the audio and video inputs..

Kommentar hinzufügen

  • Remove the eight 6mm Phillips screws around the edge.

  • Remove the two 6mm Phillips near the inputs.

Kommentar hinzufügen

  • Lift and remove the back case of the television.

Kommentar hinzufügen

  • To identify a broken fuse, look at the thin wire running through the center of the fuse. If the wire is misshapen or broken, the fuse needs to be replaced.

  • To remove the fuse, either push from one side or pry gently with a spudger.

  • Make sure to replace the fuse with the correct amperage and voltage fuse. The correct voltage and amperage is displayed on the side of the fuse.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Robert Hobson

Mitglied seit 20.01.2011

1.275 Reputation

9 Anleitungen geschrieben

Team

Cal Poly, Team 1-11, Amido Winter 2011 Mitglied von Cal Poly, Team 1-11, Amido Winter 2011

CPSU-AMIDO-W11S1G11

4 Mitglieder

9 Anleitungen geschrieben

I recently replaced a blown fuse on this model TV. When testing it with the back still off, the power light turned red, then green, then went off. Puzzling. It turned out that the back has to be on the TV and the screws have to be in (at least, the screws that make contact with metal parts). After that, all good.

atbatcat - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 17

Letzte 30 Tage: 103

Insgesamt: 8,460