Repariere deine Sachen Community Store

Shower Handle O-ring Replacement

Einleitung

If you have a shower head with a constant drip, follow this simple and easy guide to replace the rubber o-ring in your shower handle. Replacing the O-ring can help prevent hard water build up, rusting, and wasting water.

Was du brauchst

  1. Shower Handle O-ring Replacement, Shower Handle O-ring: Schritt 1, Bild 1 von 1

    • Be sure your water main is turned off, preventing water flow to your shower.

    • Using your flat head screwdriver, remove the screw from the middle of the handle.

    Übersetzen

  2. Shower Handle O-ring Replacement: Schritt 2, Bild 1 von 1

    • Use your groove joint pliers to loosen and remove the escutcheon plate.

    Übersetzen

    Reverse position of pliers pictured

    ajbdo1959 - Antwort

  4. Shower Handle O-ring Replacement: Schritt 3, Bild 1 von 1

    • Using your groove joint pliers, loosen and remove the cartridge stem.

    Übersetzen

    Reverse position of pliers pictured

    ajbdo1959 - Antwort

  5. Shower Handle O-ring Replacement: Schritt 4, Bild 1 von 1

    • Slowly unscrew and remove the stem completely.

    • There may be some water leakage due to built up pressure.

    Übersetzen

  6. Shower Handle O-ring Replacement: Schritt 5, Bild 1 von 2 Shower Handle O-ring Replacement: Schritt 5, Bild 2 von 2

    • Using your flat head screwdriver, remove the screw from the end of the stem cartridge.

    • Once the screw is removed, replace the damaged O-ring with the new replacement O-ring.

    • When installing a new O-ring, be sure the O-ring has a tight seal to prevent further leaking.

    • Once reassembly is complete and all parts are snug, turn the water main back on to allow water to flow to the shower again.

    Übersetzen
Ziellinie

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 2 anderen Mitwirkenden

Cori Fitzpatrick

Mitglied seit: 03/20/16

213 Reputation

1 Anleitung geschrieben

Auszeichnungen: 6

+ 3 weitere Auszeichnungen

Team

Michigan Tech, Team 1-6, Lauer Spring 2016 Mitglied von Michigan Tech, Team 1-6, Lauer Spring 2016

MTU-LAUER-S16S1G6

1 Mitglied

1 Anleitung geschrieben

2 Kommentare

I have to change my shower handle, but the plumber asking me to change the shower valve also. But I can’t see any reason to replace the shower valve, is it really necessary to change it when changing shower handle.

Thanks.

Rose Geiger - Antwort

This fixed the dripping shower head but now my shower handles are tight and difficult to turn and the water pressure is affected after replacing the o-rings. What could the issue be?

Cin - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 6

Letzte 7 Tage: 51

Letzte 30 Tage: 271

Insgesamt: 20,816