Was du brauchst
-
-
Remove the soda bottle and the CO2 canister from the machine.
-
-
In diesem Schritt verwendetes Werkzeug:Phillips #1 Screwdriver$8.99
-
Remove the four 17.8 mm screw from the bottom metal base using a Phillips #1 screwdriver.
-
-
-
In diesem Schritt verwendetes Werkzeug:Phillips #1 Screwdriver$8.99
-
Remove the two 18.2 mm screws from the bottom of the front cover using a Phillips #1 screwdriver.
-
-
In diesem Schritt verwendetes Werkzeug:Jimmy$7.95
-
Firmly pull the front cover off.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.