Sony Cyber-shot DSC-HX100V Viewfinder Replacement

Einleitung

If you have a faulty viewfinder and would like to know how to replace it yourself, this guide will show you how to do just that. By following these 6 simple steps, you will have your camera repaired within a few minutes and you will also save a couple of bucks.

Was du brauchst

Schritt 1 Viewfinder

Sony Cyber-shot DSC-HX100V Viewfinder Replacement, Viewfinder: Schritt 1, Bild 1 von 1

Make sure camera is turned off.
Press the ON/Off button to turn off the camera.
WARNING: Data may be lost if the camera remains on.

Bearbeiten

Schritt 2

Sony Cyber-shot DSC-HX100V Viewfinder Replacement: Schritt 2, Bild 3 von 3

Use the Phillips screwdriver size #00 to remove the 1.59mm #00 screws.
Remove 2 screws from the side of the camera.
Remove 4 screws on the bottom of the camera.
Remove 1 screw next to the eyepiece.

Bearbeiten

Schritt 3

Flip the screen back to reveal 2 hidden screws.
Remove the two 1.59mm #00 screws on the left with the Phillips #00 screwdriver.

Bearbeiten

Schritt 4

Pull the back panel of the camera upward.
Use a spudger to help pry open the back panel.

Bearbeiten

Schritt 5

Open the back panel to view the inside of the camera.
If the orange ribbon cable disconnects from its designated port, do not panic. The cable is easy to reinsert.

Bearbeiten