Einleitung
This guide will walk you through how to replace the LCD screen of your Sony Cyber-shot DSC-P10 camera.
Was du brauchst
-
-
Remove the two screws from the top of the camera.
-
Remove the two screws from the bottom of the camera.
-
Remove the rear cover of the camera.
-
-
-
-
Peel the strip of the black padding off of the screw.
-
Remove the screw.
-
Lift the right side of the screen up, then pull the screen to the right to free the LCD screen.
-
Carefully pull on the ribbon cables to disconnect them.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
UW Stout, Team 1-1, Zhou Fall 2011 Mitglied von UW Stout, Team 1-1, Zhou Fall 2011
UWSTOUT-ZHOU-F11S1G1
5 Mitglieder
3 Anleitungen geschrieben
