Einleitung
This simple 2 step guide will show you how to remove the front panel in order to maintain or replace it.
Was du brauchst
-
-
Remove all seven black 4 mm Philips #00 screws holding the front panel into place. Two on each of the sides of the camera and three on the bottom.
-
-
-
-
Gently lift the front panel up off the back of the camera prying up around the edges using a plastic opening tool or spudger if necessary.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.
Team
