Ersatzteile

Kein Ersatzteil erforderlich.

  1. Remove the battery
    • Remove the battery

    • Remove the five 2.5mm Philips #0 screws.

    • Remove the one 2.5mm Philips #0 screw inside the HDMI case.

    Kommentar hinzufügen

  2. Gently work and pull the front cover off of the camera
    • Gently work and pull the front cover off of the camera

    Kommentar hinzufügen

    • Gently pull and disconnect the ribbon cable connecting the front cover to the main body

    Kommentar hinzufügen

    • Using an iSesamo Opening Tool, Spudger, or flat dull opening tool, gently pry off the cover of the OLED/LCD assembly.

      • Take care of the tab/clip at the bottom, it can be a little tricky.

      • iSesamo Opening Tool is highly recommended

    Kommentar hinzufügen

    • Remove the copper phillips screw holding the HDMI mounting plate and detach the mounting plate.

    Kommentar hinzufügen

    • Using an iSesamo Opening Tool, Spudger, or flat dull opening tool, gently pry the OLED/LCD assembly from the adhesive strip on the main body.

      • Note: where the adhesive strip is located.

    • Turn the device over and remove the clear tape and black tape.

      • Important: Save the clear and black tape, they will be used for the replacement unit.

    Kommentar hinzufügen

    • Gently pull the small flat ribbon cable from the main body

    • In order to disconnect the large flat ribbon cable, you need to flip up the black ribbon clamp located on the main body where the socket is located

    Kommentar hinzufügen

    • Reattach new display, and reconnect all components

    • Test camera to ensure the new screen is working

    • Congrats!

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Tim

Mitglied seit 12.03.2012

1.496 Reputation

2 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 4

Letzte 30 Tage: 11

Insgesamt: 3,723