Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
If the device is on but nothing shows up on the screen, the screen may need to be replaced.
Was du brauchst
-
-
Referring back to Step 8, do the same with the wires attached to the black base.
-
-
-
-
Remove the four rubber feet and the screws beneath.
-
Remove the two exposed screws on the left side.
-
Pull back the cables until the screw is visible.
-
-
-
Using spudger, push the lock clips to unlock the ribbon cable.
-
Using tweezers, pull the connector loose.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.