Einleitung

In this guide the back housing of the phone will be removed and the camera lens will be removed from the housing.

Ersatzteile

Kein Ersatzteil erforderlich.

Find the small notch on the side of the phone. The notch is located by the "fast-forward" button and the "lock" switch.
  • Find the small notch on the side of the phone. The notch is located by the "fast-forward" button and the "lock" switch.

Kommentar hinzufügen

Insert your plastic opening tool into the notch.
  • Insert your plastic opening tool into the notch.

  • Pry off the faceplate by gently sliding the plastic opening tool around the phone while still keeping the tool under the edge of the phone.

  • When enough of the faceplate has been lifted it can be easily removed.

  • In order to replace the faceplate, simply press and snap the faceplate back onto the front of the phone.

Kommentar hinzufügen

  • Remove the four 2mm Phillips screws from the back housing of the phone.

Kommentar hinzufügen

  • Insert the plastic opening tool in the notch at the top corner of the phone.

  • Lift the corner and run the plastic opening tool around the phone until the back housing can easily be removed.

Kommentar hinzufügen

  • Remove the lends by pushing the lens from the inside of the housing.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

kgkramer

Mitglied seit 27.06.2012

121 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 1-5, Regan SU 2012 Mitglied von Cal Poly, Team 1-5, Regan SU 2012

CPSU-REGAN-SU12S1G5

3 Mitglieder

10 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 979