Sony MDR-XB450AP Extra Bass Headphones Cushion Replacement

Einleitung

This is a guide to show you how to replace the cushions on the Sony MDR-XB450AP headphones. Replace these if you are experiencing discomfort and/or if there is visible wear and tear to the cushions themselves.

Was du brauchst

Schritt 1 Cushion

Sony MDR-XB450AP Extra Bass Headphones Cushion Replacement, Cushion: Schritt 1, Bild 1 von 1

Begin by laying the headphones down flat on a surface.
Make sure that the headphone speakers are facing upward.
Be sure to check that the headphones are not plugged into any devices.

Bearbeiten

Schritt 2

Using the plastic opening tools, gently pry the speaker from the headphone's base.
There will be some tearing involved, but this is necessary to remove the original cushion.
The cushion is bonded to the headphones with a circular adhesive strip. If you plan on reusing the cushion, try to keep the adhesive attached to the cushion during removal. This way the cushion can be easily re-attached to the headphones after repair.