Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

Released November 13, 2011, this is the only model ever released. It can be disassembled with screwdrivers and a small amount of prying. Model # CECH-ZED1U

  1. Remove the base by pushing in the button and sliding out the unit. Remove the base by pushing in the button and sliding out the unit.
    • Remove the base by pushing in the button and sliding out the unit.

  2. Remove USB port cover from back plate with a metal spudger. This will prevent the cover from falling under the back plate once it is removed. This will prevent the cover from falling under the back plate once it is removed.
    • Remove USB port cover from back plate with a metal spudger.

    • This will prevent the cover from falling under the back plate once it is removed.

  3. With the  Phillips #02 screwdriver, remove the six 6 mm length x 6 mm head screws from the back plate. With the Phillips #02 screwdriver, remove the ten 6 mm length x 8 mm head screws from the back plate.
    • With the Phillips #02 screwdriver, remove the six 6 mm length x 6 mm head screws from the back plate.

    • With the Phillips #02 screwdriver, remove the ten 6 mm length x 8 mm head screws from the back plate.

    • These screws have different threads and need to be kept separate.

  4. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  5. Remove back plate with a plastic opening tool by slowing prying around the entire plate. Be gentle to avoid breaking the plastic clips which hold the plate. Once separated the plate easily lifts off.
    • Remove back plate with a plastic opening tool by slowing prying around the entire plate.

    • Be gentle to avoid breaking the plastic clips which hold the plate.

    • Once separated the plate easily lifts off.

  6. With the Phillips #01 screwdriver, remove the four 5 mm length x 7 mm head screws from the assembly (two for each side speaker). With the Phillips #01 screwdriver, remove the four 5 mm length x 7 mm head screws from the assembly (two for each side speaker). With the Phillips #01 screwdriver, remove the four 5 mm length x 7 mm head screws from the assembly (two for each side speaker).
    • With the Phillips #01 screwdriver, remove the four 5 mm length x 7 mm head screws from the assembly (two for each side speaker).

  7. Remove the plastic plate covering the speaker. When reassembling, make sure the arrow on the plastic plate is facing up. Lift the speaker out of its holding tray.
    • Remove the plastic plate covering the speaker.

    • When reassembling, make sure the arrow on the plastic plate is facing up.

    • Lift the speaker out of its holding tray.

  8. Remove the speaker by depressing the white tab on the speaker wire connector. Remove the speaker by depressing the white tab on the speaker wire connector.
    • Remove the speaker by depressing the white tab on the speaker wire connector.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

viharim

Mitglied seit: 22.10.2015

152 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 12-16, Maness Fall 2015 Mitglied von Cal Poly, Team 12-16, Maness Fall 2015

CPSU-MANESS-F15S12G16

4 Mitglieder

8 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 6

Letzten 30 Tage: 22

Insgesamt: 1,188