Repariere deine Sachen Community Store

Sony SRS-X11 Bluetooth Speaker Disassembly

Was du brauchst

  1. Sony SRS-X11 Bluetooth Speaker Disassembly, Tools Required: Schritt 1, Bild 1 von 2 Sony SRS-X11 Bluetooth Speaker Disassembly, Tools Required: Schritt 1, Bild 2 von 2

    • Phillips 00 Bit

    • Plastic and metal spudgers

    • Plastic Pick

    • Tweesers

    Übersetzen

  2. Sony SRS-X11 Bluetooth Speaker Disassembly, Back Pannel: Schritt 2, Bild 1 von 2 Sony SRS-X11 Bluetooth Speaker Disassembly, Back Pannel: Schritt 2, Bild 2 von 2

    • Get one of your pry tools and pry up the back rubber.

    • Then peel back the rubber and put it to one side

    • The adhesive can be a bit hard at first but it should come loose. The adhesive will also stay on the rubber and can be re applied.

    Übersetzen

  3. Sony SRS-X11 Bluetooth Speaker Disassembly, Remove The Back Pannel: Schritt 3, Bild 1 von 2 Sony SRS-X11 Bluetooth Speaker Disassembly, Remove The Back Pannel: Schritt 3, Bild 2 von 2

    • Get your 00 Phillips bit and unscrew all of the screws.

    • Then get a spudger and take off the back plastic pannel

    Übersetzen

  4. Sony SRS-X11 Bluetooth Speaker Disassembly, Removing The Battery: Schritt 4, Bild 1 von 2 Sony SRS-X11 Bluetooth Speaker Disassembly, Removing The Battery: Schritt 4, Bild 2 von 2

    • Get a plastic spudger and carefully pry the battery out.

    • Give the power connector a firm tug whilst wiggling the connector back and forth.

    • Alternatively you could use your tweezers to pry the connector out.

    • DO NOT use a metal pry tool for this process because you don't want to puncture the battery.

    Übersetzen

  6. Sony SRS-X11 Bluetooth Speaker Disassembly, Removing The Top: Schritt 5, Bild 1 von 2 Sony SRS-X11 Bluetooth Speaker Disassembly, Removing The Top: Schritt 5, Bild 2 von 2

    • Use a pry tool to remove the top cover like you did in Step 2

    • Then peel back the rubber and put it to one side.

    • Just like the back cover the adhesive can be hard at first. It can also be reapplied when you reassemble.

    Übersetzen

    Como puedo volver a pegar la goma frontal cuando se ha despegado sola y ha pedido el pegante?

    Moniquilla80 - Antwort

  7. Sony SRS-X11 Bluetooth Speaker Disassembly, Removing The Top Board: Schritt 6, Bild 1 von 3 Sony SRS-X11 Bluetooth Speaker Disassembly, Removing The Top Board: Schritt 6, Bild 2 von 3 Sony SRS-X11 Bluetooth Speaker Disassembly, Removing The Top Board: Schritt 6, Bild 3 von 3

    • Get you screwdriver and unscrew the screws.

    • Once all of the screws are removed you can then pull out the board.

    • You can remove the ribbon cable with your fingers or with some tweezers.

    • The screws for the top panel are different so you'll want to keep them separate.

    Übersetzen

  8. Sony SRS-X11 Bluetooth Speaker Disassembly, Removing The Bottom Pannel: Schritt 7, Bild 1 von 2 Sony SRS-X11 Bluetooth Speaker Disassembly, Removing The Bottom Pannel: Schritt 7, Bild 2 von 2

    • Get a metal pry tool and get it between the rubber and the plastic.

    • Once you have a good piece preyed up you can remove it with your hand.

    • This will deform the plastic a little bit but you can re-adhere this to the plastic underneath.

    Übersetzen

  9. Sony SRS-X11 Bluetooth Speaker Disassembly, Removing The Bottom Panel: Schritt 8, Bild 1 von 2 Sony SRS-X11 Bluetooth Speaker Disassembly, Removing The Bottom Panel: Schritt 8, Bild 2 von 2

    • Get your screwdriver and unscrew all of the screws.

    • You can the get a pry tool and pry up the plastic panel.

    • If the panel doesn't come off completely try unscrewing the screws a little more until the plastic panel comes off with the rubber.

    Übersetzen

  10. Sony SRS-X11 Bluetooth Speaker Disassembly, Removing The Bottom Board: Schritt 9, Bild 1 von 2 Sony SRS-X11 Bluetooth Speaker Disassembly, Removing The Bottom Board: Schritt 9, Bild 2 von 2

    • Get your tweezers and pry off the connector being careful not to tear the cable.

    • You can then get a plastic pry tool and put it in one of the corners of the board to pry it up and out of the casing.

    Übersetzen

  11. Sony SRS-X11 Bluetooth Speaker Disassembly, Removing connectors: Schritt 10, Bild 1 von 1

    • You can then remove the speaker cable and the top board cable.

    Übersetzen
Abschluss

To reassemble your device, follow these instructions in reverse order.

10 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 1 anderen Mitwirkenden

Hadena

Mitglied seit: 07/13/18

915 Reputation

2 Anleitungen geschrieben

Auszeichnungen: 8

+ 5 weitere Auszeichnungen

5 Kommentare

Dear sir,

Can you supply boards for sony SRS-X11 boards kindly replay immediately.

kamath

biomedical engineer

nagkamath@gmail.com

kamath - Antwort

our device is not getting on, no indication can you any thing to check.

kamath - Antwort

Did someone replace the battery?

Daniel Barrera - Antwort

Dónde puedo conseguir el flexor que conecta las dos lógica

ca_zador222 - Antwort

Porque al estraerlo se vencieron

ca_zador222 - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 5

Letzte 7 Tage: 20

Letzte 30 Tage: 85

Insgesamt: 9,692