Einleitung

Repairing/replacing the DVD drive.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Turn the laptop upside down The battery is located on the front right side of the laptop; the opposite side from the floppy disk drive.
    • Turn the laptop upside down

    • The battery is located on the front right side of the laptop; the opposite side from the floppy disk drive.

  2. As shown by the arrow, slide the plastic cover up and then pull out and downwards. You should now be able to pull the battery out. You should now be able to pull the battery out.
    • As shown by the arrow, slide the plastic cover up and then pull out and downwards.

    • You should now be able to pull the battery out.

  3. Remove the four 16mm Phillips screws bordering the edge of the laptop, indicated here.
    • Remove the four 16mm Phillips screws bordering the edge of the laptop, indicated here.

  4. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  5. Remove the 4mm Phillips screw on the right rear side of the laptop next to the audio ports. This will release the speaker grille.
    • Remove the 4mm Phillips screw on the right rear side of the laptop next to the audio ports.

    • This will release the speaker grille.

  6. Flip the computer back over and open the screen.
    • Flip the computer back over and open the screen.

  7. Slide the blue speaker grille (located above the keyboard) to the right and gently pull upward.  The grille will still be connected by a white electrical strip. Carefully pull out the white electrical strip. Carefully pull out the white electrical strip.
    • Slide the blue speaker grille (located above the keyboard) to the right and gently pull upward. The grille will still be connected by a white electrical strip.

    • Carefully pull out the white electrical strip.

  8. Remove the 4mm Phillips screw in the center (located to the left of the green strip). Carefully pull the green strip straight up to disconnect it. The keyboard can now be removed.
    • Remove the 4mm Phillips screw in the center (located to the left of the green strip).

    • Carefully pull the green strip straight up to disconnect it.

    • The keyboard can now be removed.

  9. Remove the 4mm Phillips screw that connects the hard drive cage to the DVD drive. Carefully remove the copper wire strip.
    • Remove the 4mm Phillips screw that connects the hard drive cage to the DVD drive.

    • Carefully remove the copper wire strip.

  10. Slide the DVD drive out. Slide the DVD drive out. Slide the DVD drive out.
    • Slide the DVD drive out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Sara Lillard

Mitglied seit: 11.04.2011

117 Reputation

8 Anleitungen geschrieben

Team

Cal Poly, Team 12-36, Maness Spring 2011 Mitglied von Cal Poly, Team 12-36, Maness Spring 2011

CPSU-MANESS-S11S12G36

4 Mitglieder

8 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 1,555