Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Einleitung

The PCG F360 comes with a floppy drive in an expansion bay. This can be replaced or swapped out for a battery or for a weight saver.

  1. Position the laptop screen-side down as shown.
    • Position the laptop screen-side down as shown.

    • In this position the battery housing will be located on the right hand side.

  2. Lift the panel up and then out to gain access to the battery.
    • Lift the panel up and then out to gain access to the battery.

  3. SPAR DIR DAS UPGRADE

    Mach dein iPhone so gut wie neu mit unseren Fix Kits.

    Jetzt entdecken

    SPAR DIR DAS UPGRADE

    Mach dein iPhone so gut wie neu mit unseren Fix Kits.

    Jetzt entdecken
  4. Use the indentations to pull the old battery out.
    • Use the indentations to pull the old battery out.

  5. The battery is now removed and it is safe to move on to uninstalling other components.
    • The battery is now removed and it is safe to move on to uninstalling other components.

  6. With one hand slide and hold the tab shown. With your other hand, pull the floppy drive out of the floppy drive bay.
    • With one hand slide and hold the tab shown.

    • With your other hand, pull the floppy drive out of the floppy drive bay.

    • To replace the floppy drive, simply slide the drive into the slot until it clicks.

Abschluss

To reassemble your device, follow these instructions in reverse order.

ahintz

Mitglied seit: 21.04.2010

19 Reputation

8 Anleitungen geschrieben

Team

Cal Poly, Team 16-3, Maness Spring 2010 Mitglied von Cal Poly, Team 16-3, Maness Spring 2010

CPSU-MANESS-S10S16G3

3 Mitglieder

8 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 0

Insgesamt: 2,663