Zum Hauptinhalt wechseln

Sony Vaio VGN-S260 Upper Casing Replacement

Was du brauchst

  1. Sony Vaio VGN-S260 Upper Casing Replacement, Battery: Schritt 1, Bild 1 von 3 Sony Vaio VGN-S260 Upper Casing Replacement, Battery: Schritt 1, Bild 2 von 3 Sony Vaio VGN-S260 Upper Casing Replacement, Battery: Schritt 1, Bild 3 von 3
    • Flip the laptop over so the Vaio logo is facing down.

    • Locate the battery at the top and Find the release and unlock slides on the battery.

    • Slide the unlock tab to the unlock position.

    • Slide the release tab in the direction of the arrow, i.e. towards the unlock tab.

  2. Sony Vaio VGN-S260 Upper Casing Replacement: Schritt 2, Bild 1 von 2 Sony Vaio VGN-S260 Upper Casing Replacement: Schritt 2, Bild 2 von 2
    • With the tabs still in the unlock position, slide the battery away from the main case.

  3. Sony Vaio VGN-S260 Upper Casing Replacement, Keyboard: Schritt 3, Bild 1 von 2 Sony Vaio VGN-S260 Upper Casing Replacement, Keyboard: Schritt 3, Bild 2 von 2
    • Flip the computer over so the Vaio logo is facedown.

    • Unscrew the 2 screws next to the battery.

  4. Sony Vaio VGN-S260 Upper Casing Replacement: Schritt 4, Bild 1 von 1
    • Flip the computer over again so the Vaio logo is face up.

    • Open the lid.

  5. Sony Vaio VGN-S260 Upper Casing Replacement: Schritt 5, Bild 1 von 2 Sony Vaio VGN-S260 Upper Casing Replacement: Schritt 5, Bild 2 von 2
    • Press down on the outer gray shell around the keyboard.

    • Use the spudger to gently lift keyboard.

    • Do not pull up the keyboard too far as it is attached to a ribbon underneath.

    There are 2 spring-held latches, one above the F4 and one above the F12. Push a latch up into the frame of the keyboard, then lift the keyboard gently in that area so the latch doesn't spring back. Then push the other latch and the keyboard will be released.

    Yishai Sered - Antwort

  6. Sony Vaio VGN-S260 Upper Casing Replacement: Schritt 6, Bild 1 von 2 Sony Vaio VGN-S260 Upper Casing Replacement: Schritt 6, Bild 2 von 2
    • Lift up lever underneath the ribbon to detach the keyboard.

  7. Sony Vaio VGN-S260 Upper Casing Replacement, Upper Casing: Schritt 7, Bild 1 von 1
    • Remove memory/wireless compartment cover.

  8. Sony Vaio VGN-S260 Upper Casing Replacement: Schritt 8, Bild 1 von 3 Sony Vaio VGN-S260 Upper Casing Replacement: Schritt 8, Bild 2 von 3 Sony Vaio VGN-S260 Upper Casing Replacement: Schritt 8, Bild 3 von 3
    • Flip so the Vaio Logo is face down.

    • Locate and remove a total of 8 screws on the bottom.

    There are 2 more screws on the bottom, one in the middle of the front next to the flash stick socket, and one under the memory door.

    Yishai Sered - Antwort

  9. Sony Vaio VGN-S260 Upper Casing Replacement: Schritt 9, Bild 1 von 1
    • Find and remove 5 screws (they all have arrows next to them) from cover.

  10. Sony Vaio VGN-S260 Upper Casing Replacement: Schritt 10, Bild 1 von 3 Sony Vaio VGN-S260 Upper Casing Replacement: Schritt 10, Bild 2 von 3 Sony Vaio VGN-S260 Upper Casing Replacement: Schritt 10, Bild 3 von 3
    • Flip the laptop over so the Vaio logo is face up.

    • Use the spudger to pop up the upper casing.

    • Do not lift too much as the upper casing is attached to wires underneath.

    • Remove the wires that are attaching the upper casing to the motherboard.

    There are also 5 screws from the top of the uppercasing.

    Yishai Sered - Antwort

    The are 4 cables to remove: flat cable for the power and S buttons at top center; flat cable for the touchpad at bottom center; and 2 twisted pairs for the speakers.

    The speaker cable socket is very delicate. If all you are getting at is the CPU or the hard drive, it may be enough to disconnect the flat cables and gently rotate the uppercasing shifting it left to allow access to the right-hand side with the CPU fan and the hard drive.

    Yishai Sered - Antwort

    The top panel has cutouts that allow the cables to be disconnected before the top of the case is removed. The two flat cables are not clamped and can be pulled vertically out of their connectors. The delicate speaker cables are connected to the motherboard with plugs which can be gently levered up out of their sockets.

    roberttrevellyan - Antwort

  11. Sony Vaio VGN-S260 Upper Casing Replacement: Schritt 11, Bild 1 von 1
    • Remove the upper casing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Jeffrey Bryan

Mitglied seit: 04/20/10

570 Reputation

11 Anleitungen geschrieben

Team

Cal Poly, Team 16-4, Maness Spring 2010 Mitglied von Cal Poly, Team 16-4, Maness Spring 2010

CPSU-MANESS-S10S16G4

4 Mitglieder

30 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 4,778