Was du brauchst
-
-
Unscrew the two screws on the back of the device using a Phillips PH000 screwdriver.
-
-
-
Peel back the black tape from the device to the battery from the side of the device.
-
-
-
-
Remove the yellow film covering the circuit board with pointed precision tweezers.
-
-
-
Using pointed precision tweezers, unplug the wires connecting the battery and chip from the chip.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
Team
Eastern Washington University, Team 2-5, Plummer Fall 2015 Mitglied von Eastern Washington University, Team 2-5, Plummer Fall 2015
EWU-PLUMMER-F15S2G5
4 Mitglieder
6 Anleitungen geschrieben
