Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

  1. Tools you will need is the Phillips #00 precision screwdriver, Plastic Opening Tools, and tweezers. Insert plastic opening tool in the corner of device and slide along edges to separate adhesive Remove cover
    • Tools you will need is the Phillips #00 precision screwdriver, Plastic Opening Tools, and tweezers.

    • Insert plastic opening tool in the corner of device and slide along edges to separate adhesive

    • Remove cover

  2. Locate the SD card reader in the bottom left hand corner
    • Locate the SD card reader in the bottom left hand corner

    • Remove all screws connecting the metal plate to the device.

  3. Nintendo Switch Kits

    Eine schnelle Lösung, um wieder ins Spiel zu kommen

    Switch Kits kaufen

    Nintendo Switch Kits

    Eine schnelle Lösung, um wieder ins Spiel zu kommen

    Switch Kits kaufen
  4. After all the screws have been removed lift the circuit board up to wiggle free.
    • After all the screws have been removed lift the circuit board up to wiggle free.

  5. After Wiggled free place the tweezers on the piece of electrical tape connecting it to the device.
    • After Wiggled free place the tweezers on the piece of electrical tape connecting it to the device.

    • Once placed there lift up and disconnect the SD card reader from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Martin Luna

Mitglied seit: 24.09.2014

1.708 Reputation

5 Anleitungen geschrieben

Team

USF Tampa, Team 15-6, Remmell Fall 2014 Mitglied von USF Tampa, Team 15-6, Remmell Fall 2014

USFT-REMMELL-F14S15G6

3 Mitglieder

5 Anleitungen geschrieben

How long did it take to complete???

Steve Donnelly - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 2

Letzten 7 Tage: 3

Letzten 30 Tage: 11

Insgesamt: 1,768