Einleitung
Replacing the back cover of the Sony Xperia M4 Aqua is somewhat different than on other phones, but the process is simple. Follow these steps:
Was du brauchst
-
-
Place the phone face-down, and use a heat gun or hair dryer to evenly heat the back surface until to soften the adhesive.
-
-
-
Attach a suction cup to the back of the M4 Aqua by carefully pushing down on it near the top of the phone.
-
-
-
-
While Pulling on the suction cup, slide a thin plastic spacer (guitar picks work well) between the back cover and the phone. Slide it around the edges to break the adhesive seal. Be careful, but don't be afraid to use some force. You should hear a sticky breaking sound.
-
-
-
Remove the back cover by pulling it from the chassis. it is flexible and can be bent, be careful.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
17 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
USF Tampa, Team 4-5, Lacy Spring 2016 Mitglied von USF Tampa, Team 4-5, Lacy Spring 2016
USFT-LACY-S16S4G5
3 Mitglieder
8 Anleitungen geschrieben
3 Kommentare
Thanks. Do you know where to order a new back cover? Mine has shattered
