Einleitung
Removing this part is hard for the first time because the manufacturer used adhesive to keep it in place.
Was du brauchst
-
-
Use the plastic opening tool to pry the top plastic section off.
-
-
-
Use the plastic opening tool to pry the bottom plastic section off.
-
-
-
-
Remove the four 5mm screws.
-
Use the plastic opening tool to pry off the back.
-
-
-
Use the plastic opening tool to detach the ribbon running across the battery.
-
Use the plastic opening tool to detach the ribbon connecting the battery to the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
4 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
USF Tampa, Team 4-4, Brown Fall 2014 Mitglied von USF Tampa, Team 4-4, Brown Fall 2014
USFT-BROWN-F14S4G4
3 Mitglieder
10 Anleitungen geschrieben
