Zum Hauptinhalt wechseln

Sony Xperia XA1 Ultra Antenna Module Replacement

Was du brauchst

  1. Sony Xperia XA1 Ultra Antenna Module Replacement, Back Assembly: Schritt 1, Bild 1 von 2 Sony Xperia XA1 Ultra Antenna Module Replacement, Back Assembly: Schritt 1, Bild 2 von 2
    • Wedge your finger under the bottom ridge of the SD card insert.

    • Pull outwards with your fingers to remove the SD card from the left side of device.

    How do you remove it? (Seems obvious but write for any audience, and say how to do things instead of just what to do)

    Kyle Ladtkow - Antwort

  2. Sony Xperia XA1 Ultra Antenna Module Replacement: Schritt 2, Bild 1 von 1
    • Use a hair dryer to heat each corner of the phone.

    • Alternate heating each corner for a minute to loosen the adhesive binding the back cover to the phone.

    • Don't heat one area for too long; the phone may get damaged from overheating.

    Consider saying “loosen” instead of “soften” so that steps 2 and 3 use the same terms. Somebody may not know that heating the glue will loosen it, and so they will be confused reading “once the adhesive is loosened” in step 3.

    Kyle Ladtkow - Antwort

  3. Sony Xperia XA1 Ultra Antenna Module Replacement: Schritt 3, Bild 1 von 1
    • Press a suction cup on a heated corner of the device.

    • Hold the phone down and gently lift the suction cup to create a small gap.

    • You may hear crunching or popping sounds when you lift up the back cover.

    sure that there is adhesive tape on backcover?

    where should it tape on at the device inside?

    looks more like only plugged together`?

    Alexander H - Antwort

  4. Sony Xperia XA1 Ultra Antenna Module Replacement: Schritt 4, Bild 1 von 1
    In diesem Schritt verwendetes Werkzeug:
    Plastic Cards
    $2.99
    Kaufen
    • Insert your iFixit Opening Tool in the small gap between your phone and the back cover.

    • Lift up on the iFixit Opening Tool and insert your plastic card in the small gap between your phone and the back cover.

    Period missing for first point.

    Kyle Ladtkow - Antwort

  5. Sony Xperia XA1 Ultra Antenna Module Replacement: Schritt 5, Bild 1 von 1
    • Slide your plastic card along the side of your phone to loosen the adhesive.

    • Move the card along the sides of the phone to lift all of the corners.

    Can you clarify what should be repeated in this step?

    Tiffany Dang - Antwort

  6. Sony Xperia XA1 Ultra Antenna Module Replacement: Schritt 6, Bild 1 von 1
    • Lift up the back cover by lifting up the sides of the phone with your hand.

    • Apply a new strip of adhesive for reassembly.

  7. Sony Xperia XA1 Ultra Antenna Module Replacement, Antenna Module: Schritt 7, Bild 1 von 2 Sony Xperia XA1 Ultra Antenna Module Replacement, Antenna Module: Schritt 7, Bild 2 von 2
    • Remove the four 4mm T5 screws on the top of the black panel securing the antenna module to the device.

    Clarify where the screws are

    Tiffany Dang - Antwort

    That is not the antenna module !!!

    ptbgn - Antwort

  8. Sony Xperia XA1 Ultra Antenna Module Replacement: Schritt 8, Bild 1 von 2 Sony Xperia XA1 Ultra Antenna Module Replacement: Schritt 8, Bild 2 von 2
    • Insert your iFixit Opening Tool underneath the antenna module.

    • Lift up gently with the iFixit Opening Tool to remove the antenna module.

    • The antenna module may be difficult to remove.

    Maybe add a caution that the module is hard to take off

    Tiffany Dang - Antwort

    Could use better explanation on how to take off

    Tiffany Dang - Antwort

    “to take off piece” change to take off the piece? Or even be specific, “pull with your hands to remove the module.”

    Kyle Ladtkow - Antwort

    also the picture makes it look as if you flip the antenna board over but it needs to be pulled up from the phone as if you bend it over it will break

    Andrew Bromfield - Antwort

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Jacob Jung

Mitglied seit: 04/18/18

1.429 Reputation

9 Anleitungen geschrieben

Team

Cal Poly, Team S16-G3, Livingston Spring 2018 Mitglied von Cal Poly, Team S16-G3, Livingston Spring 2018

CPSU-LIVINGSTON-S18S16G3

4 Mitglieder

9 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 6

Insgesamt: 1,183