Einleitung

Also known as Xperia Z LT36i, Xperia C6603, Xperia C6602, Xperia Z LTE, Xperia Z HSPA+

How to change broken, not working Digitizer or Display.

This procedure is very hard. You must have experience to do this.


Please SUBSCRIBE to my channel ツ

Einführungsvideo

  1. Warm the Battery cover before disassemble it. Warm the Battery cover before disassemble it. Warm the Battery cover before disassemble it.
    • Warm the Battery cover before disassemble it.

  2. 'Carefully' warm the battery too 'Carefully' warm the battery too 'Carefully' warm the battery too
    • 'Carefully' warm the battery too

  3. Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board. Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board. Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board.
    • Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board.

  4. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um

    Erfolgreich repariert? Genial!

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

    Wir sind alle Genies

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

  5. This are: main Camera, front Camera and antenna wire Flex cable. Now we can remove the Motherboard. Now we can remove the Motherboard.
    • This are: main Camera, front Camera and antenna wire Flex cable.

    • Now we can remove the Motherboard.

  6. The Headphone connector and the Ringer / Cover / Signal Antenna module. The Headphone connector and the Ringer / Cover / Signal Antenna module. The Headphone connector and the Ringer / Cover / Signal Antenna module.
    • The Headphone connector and the Ringer / Cover / Signal Antenna module.

  7. Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go. Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go. Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go.
    • Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go.

  8. Warm the Touch screen before you start to disassemble it. Warm the Touch screen before you start to disassemble it. Warm the Touch screen before you start to disassemble it.
    • Warm the Touch screen before you start to disassemble it.

  9. Let's assemble the new spare part. Let's assemble the new spare part. Let's assemble the new spare part.
    • Let's assemble the new spare part.

  10. All's well, that ends well. :) . Did you do it successfully?
Abschluss

To reassemble your device, follow these instructions in reverse order.

76 weitere Nutzer haben diese Anleitung absolviert.

ZFix

Mitglied seit: 09.12.2013

162.554 Reputation

304 Anleitungen geschrieben

Team

Master Techs Mitglied von Master Techs

Community

280 Mitglieder

784 Anleitungen geschrieben

Same procedure with Sony Xperia Z2?

Fredrik - Antwort

How do you warm it? With what and what temperature ?

Jeroen - Antwort

with a hairdryer for like 3 min on high

Peter Tembo -

With hair dryer.

ZFix - Antwort

Same procedure with Sony Xperia Z1? Where do i get the screen parts?

chrgro - Antwort

Statistik anzeigen:

Letzte 24 Stunden: 11

Letzte 7 Tage: 60

Letzte 30 Tage: 299

Insgesamt: 228,096