Zum Hauptinhalt wechseln
  1. Heat the back cover to soften the adhesive sticker. Place the suction cup and inert metal opening tool to open a gap from top side.
    • Heat the back cover to soften the adhesive sticker.

    • Place the suction cup and inert metal opening tool to open a gap from top side.

  2. Insert the guitar pick and slide it to cut the adhesive sticker underneath. Remove back cover. Remove back cover.
    • Insert the guitar pick and slide it to cut the adhesive sticker underneath.

    • Remove back cover.

  3. Release battery connector in order to prevent short circuit.
    • Release battery connector in order to prevent short circuit.

  4. Remove rear camera. Remove rear camera. Remove rear camera.
    • Remove rear camera.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Lenka

Mitglied seit: 06.11.2015

2.165 Reputation

6 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 2

Letzten 7 Tage: 9

Letzten 30 Tage: 25

Insgesamt: 4,287