Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Was du brauchst
-
-
Heat up the back cover to soften the adhesive.
-
Place the suction cup to open a gap from top side, then insert guitar picks and slide it to cut the adhesive underneath.
-
Remove back cover.
-
-
-
Twist off 10 Phillips screws all.
-
Loosen NFC clip and flashlight clip.
On the NFC clip: Pull the hook on the top down to loosen the clip.
On the NFC click: look at Step 4 below, second picture and magnify the part with the NFC clip to get an idea how it needs to be loosened.
On the flashlight clip: it is glued, so applying some heat helps.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
5 weitere Nutzer:innen haben diese Anleitung absolviert.
2 Kommentare
where i can get the plastic bracket? my plastic bracket is broke
Step 4: the flash/lamp is lighly glued to the back frame. It must be delicately unglued off before the frame can be removed.