Einleitung

Make sure you can explore the Xplod very well.

Press down the release button on the bottom left corner of the face plate. Then remove the face plate carefully. Then remove the face plate carefully.
  • Press down the release button on the bottom left corner of the face plate.

  • Then remove the face plate carefully.

Kommentar hinzufügen

Kommentar hinzufügen

  • Using the Phillips #1 Screwdriver, unscrew the 2 thick screws (length - 7.69mm) located on both sides of the stereo.

  • Remove side-metal plates gently.

  • Use the Heavy-duty Spudger, insert the flat end under each of the black flaps indicated in the picture. Use leverage to pry and pop them loose.

Kommentar hinzufügen

Remove the black front plate of the stereo.
  • Remove the black front plate of the stereo.

Kommentar hinzufügen

Mac • RAM-Erweiterungssets
Beschleunigen Sie Ihren Mac. Erweitern Sie seinen Speicher.
Mac • RAM-Erweiterungssets
Get more memory out of your Mac.
  • Using the Phillips #0 Screwdriver, unscrew the 1 gold screw (height - 7.47mm) on the top of the stereo.

  • Lift off the top plate.

Kommentar hinzufügen

  • Using the Phillips #0 Screwdriver, unscrew the 8 gold screws (length - 9.26mm), located on the back side of the stereo.

  • Using the Phillips #0 Screwdriver, unscrew the 2 black screws (length - 13.27mm), also located on the back of the stereo.

  • Using the Phillips #0 Screwdriver, unscrew the 1 gold screw (length - 9.3mm), located on the bottom of a hole as noted in pictures (2) and (3).

Kommentar hinzufügen

Carefully pull the fuse out of the back of the stereo. Carefully pull the fuse out of the back of the stereo. Carefully pull the fuse out of the back of the stereo.
  • Carefully pull the fuse out of the back of the stereo.

Kommentar hinzufügen

Firmly grip the body of the stereo and pull off the silver back plate. Firmly grip the body of the stereo and pull off the silver back plate.
  • Firmly grip the body of the stereo and pull off the silver back plate.

Kommentar hinzufügen

Kommentar hinzufügen

  • Using the Phillips #0 Screwdriver, unscrew the 2 gold screws (length - 7.34mm) found on both sides of the stereo.

Kommentar hinzufügen

Grip the top portion of the stereo, where the CD-Drive is located, and gently pull up to release it, but you will not be able to lift it all the way out. Grab the two tabs located near the back of the stereo, and gently pull the CD-drive front the rest of the device. Grab the two tabs located near the back of the stereo, and gently pull the CD-drive front the rest of the device.
  • Grip the top portion of the stereo, where the CD-Drive is located, and gently pull up to release it, but you will not be able to lift it all the way out.

  • Grab the two tabs located near the back of the stereo, and gently pull the CD-drive front the rest of the device.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Chao Chen

Mitglied seit 04.10.2011

68 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 5-35, Amido Fall 2011 Mitglied von Cal Poly, Team 5-35, Amido Fall 2011

CPSU-AMIDO-F11S5G35

4 Mitglieder

8 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 7

Letzte 30 Tage: 27

Insgesamt: 2,965