Einleitung
All that is needed to replace the battery is a screwdriver.
Was du brauchst
-
-
Place the lamp LED side down on a clean workspace.
-
Remove the screws holding the casing together using a Phillips #1 Screwdriver.
-
-
-
-
Locate the battery.
-
Gently lift the battery from the device.
-
-
-
Locate the clip attaching the battery pack to the circuit board.
-
Use tweezers to remove the portion of the clip attached to the battery.
-
-
-
Align the black wire of the new battery towards the center of the device.
-
Press down firmly on the clip to insure that it is properly connected.
-
-
-
Seat the battery in the orange component so that the short end of the battery pack is touching the foam bumper.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
6 weitere Nutzer:innen haben diese Anleitung absolviert.
8 Kommentare
please help in finding the life p04 battery,3.2v ,1500 mah,batch #20309
as my solar lights battery is dead..iam unable to find out whr i will get a new one
where to get the battery spare part?
Howi can get 6.6 v sunking pro battery?please help me.
I want to buy a battery for sunking pro lantern. How i can get it? Please help me.
I want to buy a battery for sunking pro lantern. Where can I can get it? Please help me.
tigroulu@gmail.com
Where to get sun king pro solar battery?