Super Nintendo Super Nintendo Outer Case Replacement

Einleitung

This guide will show you how to open up your Super Nintendo.

Was du brauchst

Schritt 1 Outer Case

Super Nintendo Super Nintendo Outer Case Replacement, Outer Case: Schritt 1, Bild 1 von 1

Remove the six screws located on the underside of the system using the Gamebit 4.5mm screwdriver.

In order to prevent damage to the fuse, make sure that you always cycle the power before doing so with the power supply disconnected.

Raucedine - 23. Jan 2014 Antwort

There is a step missing from these instructions. There are two philips head screws where the AV/Power ports are on the back of the motherboard that need to be removed before you can remove the motherboard itself.

phoenixknight8082 - 3. Jun 2015 Antwort

I replaced my controller port, thinking that it was the culprit, but my SNES is still having issues. Nothing works for controller port 1 and only a few buttons work for controller port 2. I tried switching out the controllers and the issue seems to be isolated to the SNES itself. Does anyone have any other suggestions for fixing my issue?

Thanks in advance.

Mike Watts - 5. Dez 2015 Antwort

For those facing a black screen on startup (after having cleaned pins on cartridges and cartridge slot) WITH power light coming on, turn off console, remove power, and try shorting out the capacitor leads. My SNES stopped working suddenly after a single power cycle, and shorting out the leads (while UNPOWERED) revived it.

Austin Barnett - 25. Jan 2016 Antwort

Could you further explain how to short the capacitor leads?

Will Pulman - 21. Jun 2016