Einleitung

In this replacement guide, we will show you how to remove the back cover and all of the inside components of your tablet in order to replace the back cover.

  1. To begin, insert the plastic opening tool between the display and back cover and apply force until the back cover comes free from the device.
    • To begin, insert the plastic opening tool between the display and back cover and apply force until the back cover comes free from the device.

    Kommentar hinzufügen

  2. Carefully remove orange ribbons from the motherboard by opening the small plastic flaps and pulling with tweezers.
    • Carefully remove orange ribbons from the motherboard by opening the small plastic flaps and pulling with tweezers.

    • This will disconnect the front part of the tablet from the back entirely. Set it safely aside and continue

    Kommentar hinzufügen

  3. Kostenloser Versand bei Bestellungen über 20 $
    Verwende den Code BLUEANDBLACK an der Kasse
    Kostenloser Versand bei Bestellungen über 20 $
    Verwende den Code BLUEANDBLACK
    • To remove the battery, use the plastic opening tool to pry one corner off of the battery and gently move the opening tool down to pull up one side of the battery.

    • The battery is glued down, so some force may be required to remove it from the back cover.

    Kommentar hinzufügen

    • To remove the speakers, use the plastic opening tool to gently pry the speaker from the back cover, then use the tweezers to remove them fully.

    Kommentar hinzufügen

    • To remove the motherboard, start by unscrewing the three (3) small Phillips head screws using a 1.5 mm Phillips head (Phillips #000) screwdriver.

      • The small red washers must be kept along with the screws when reassembling the device, make sure you store them safely until reassembling.

    • The motherboard has soldered connections to the battery, speakers, and the charging indicator LED. Be careful when pulling the motherboard from the back cover because these parts will come along with it.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Michael Turner

Mitglied seit 31.03.2018

121 Reputation

1 Anleitung geschrieben

Team

IUPUI, Team S1-G1, Wilson Spring 2018 Mitglied von IUPUI, Team S1-G1, Wilson Spring 2018

IUPUI-WILSON-S18S1G1

5 Mitglieder

3 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 3

Insgesamt: 83